Winchester  pre-64 model 94 Carbine
Top Eject


Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server

The drawings listed below are scanned off existing factory catalogs, or existing books 
These Illustrated parts Drawings are shown only to help you identify needed parts, they ARE NOT parts that are made or supplied by the host of this website

Most of these illustrations will be from factory catalogs, however some are taken from Frank de Haas's Single Shot Rifle book & are for identification only, & ARE NOT factory part numbers unless identified as such.  This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.

Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed 

Part numbers listed above & below are factory part numbers.  In this illustration from a Winchester 1978 catalog, will be correct for guns made between about 1936 to 1964.  These parts except the stocks, barrel & magazine length for the rifle will still fit many of the regular older rifles.  The few parts that have a number that has an X suffix behind it indicates that the X part is identical & is used on the post 64 version.

Copyright © 2004 - 2020  LeeRoy Wisner  with credit given for original illustrations.  All Rights Reserved

Back to the Main Ramblings Page

Originated 05-17-04  Last updated 11-08-2020
to contact the author click here