Stevens No. 12 Marksman
The illustration shown below was scanned off a Frank de Haas Single Shot Rifles & Actions book, and adding factory part numbers if applicable. This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.
Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed
The Above illustration taken from Frank de Haas Single Shot Rifles & Actions book but the numbers changed to match factory part numbers
|
The parts listed below are for your
identification purposes only. The author of this website DOES NOT have any parts. |
| 1 | Barrel Only | 20 | Lever Screw |
| 2 | Barrel Sleeve | 21 | Link |
| 6 | Cocking Plunger | 22 | Link Screw |
| 7 | Cocking Plunger Spring | 23 | Link Pin |
| 8 | Extractor | 24 | Mainspring |
| 9 | Extractor Pin | 25 | Mainspring Plunger |
| 10 | Firing Pin | 26 | Mainspring Plunger Screw |
| 11 | Firing Pin Pin | 27 | Stock Bolt Nut |
|
15 |
Frame | 30 | Trigger |
| 16 | Hammer | 31 | Trigger Spring |
| 17 | Hammer Screw | 32 | Trigger Screw |
| 18 | Joint Lever | 38 | Take-Down Screw |
| 19 | Lever | . | . |
Copyright © 2004 - 2020
LeeRoy Wisner with credit given for original illustrations. All
Rights Reserved
Back to the Main Ramblings
Page
Originated 08-09-2006 Last updated
11-08-2020
Contact the author