Stevens model 26
Crackshot
The illustration shown below was scanned off a Frank de Haas Single Shot Rifles & Actions book, and adding factory part numbers if applicable. This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.
Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed
The Above illustration taken from Frank de Haas Single Shot
Rifles & Actions book but the numbers changed to match factory part numbers
|
The parts listed below are for your identification purposes only. The author of this website DOES NOT have any parts. |
| 1A | Barrel without Sights | 17 | Hammer Screw |
| 2A | Barrel Lug | 18 | Lever |
| 3 | Butt Plate | 19 | Lever Pin |
| 4 | Butt plate Screw | 20 | Lever Pin Roll |
| 5 | Breech Block 22 | 21 | Lever Pin Roll Screw |
| 6 | Breech Block 32 | 22 | Mainspring-Coil |
| 7 | Breech Bolt Screw | 23 | Mainspring Plunger |
| 8 | Breech Block Plunger | 24 | Mainspring Plunger Sleeve |
| 9 | Breech Block Plunger Spring | 25 | Stock & Butt Plate |
| 10-22 | Extractor 22 | 26 | Stock Bolt |
| 10-32 | Extractor 32 | 27 | Stock Bolt Nut |
| 11 | Frame | 28 | Take-Down Screw |
| 12 | Fore-end | 29 | Trigger |
| 13 | Fore-end Nut | 29A | Trigger Spring |
| 14 | Firing Pin | 30 | Trigger Screw |
| 15 | Firing Pin Pin | 31 | Sight (Front) |
| 16 | Hammer | 32 | Sight (Rear) |
Copyright © 2004 - 2020
LeeRoy Wisner with credit given for original illustrations. All
Rights Reserved
Back to the Main Ramblings
Page
Originated 01-03-2009 Last updated 11-08-2020