Savage 340 Expolded Views

The illustration shown below was scanned off a Savage factory parts list, using factory reference numbers, which are converted to factory part numbers. This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.

Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed

The Above illustration taken from the Savage parts catalog

Note -- this gun was originally made as the Stevens model 325, the same basic parts still interchange with the exception of the early sights & ejector being different. There are many different series of the 340 as B, C, D, V etc. These may have some differences depending on the caliber, sights, trigger guard & stock.

1	325-541	Gas Shield Key	36	340B-53C	Ejector - 30-30
2	325-542	Gas Shield Key Spring	37	325A-55	Ejector Pin
3	340B-113	Gas Shield	38	325-201	Safety Spring
4	340-313	Cocking Piece Cap	39	76-201	Safety Plunger Ball
5	325-116	Cocking Piece Cap Pin	40	340-280	Trigger Bracket
6	325-35	Cocking Piece Key	40A	325-281	Trigger Bracket Screw (short)
7	340-34	Cocking Piece	41	325-206	Sear Pin
8	340-25C	Bolt Body & Handle	42	340-192	Safety
9	325-166	Mainspring	43	325-200	Safety Screw
10	340-117	Gas Shield Clip	44	238-159	Magazine Retainer Screw
11	325-116	Gas Shield Clip Pin	45	58-153	Magazine Retainer Spring
12	325-77	Firing Pin	46	340-671	Baffle Block, 222 / 225
13	340-19C	Bolt Head, 30-30 / 225 Winchester	47	340-672	Baffle Block Screw, 222 / 225
14	325-59C	Extractor, 30-30 / 225 Winchester	48	325-209	Sear Spring
14	325-59H	Extractor, 22 Hornet (O/S clip type)	49	325-209	Sear
15	325-20	Bolt Head Retaining Pin	50	325-317	Sear Lever
16	340-19H	Bolt Head, 222 Remington caliber	50A	325-318	Sear Cam Pin
17	340-56	Ejector Spring, 222 Remington caliber	51	325-158	Magazine Stop
18	340-53H	Ejector, 222 / 225	52	325-284	Trigger Spring
19	340-670	Ejector Spring Pin, 222 / 225	53	340-279	Trigger
20	340-55	Ejector Pin, 222 / 225	54	340-81	Trigger Bracket Screw
21	340-68	Extractor Spring, 222 Remington caliber	55	340-154	Magazine Retainer Spring (rear)
22	340-59H	Extractor 222 Remington caliber	56	94-32	Butt Plate Screw (2 required)
23	340C-229	Rear Sight	57	775-5	Butt Plate
24	110-233	Rear Sight Step	58	775-616	Butt Plate Liner
25	325-227	Front Sight Screw, (short)	59	99-423	Pistol Grip Cap Screw
26	325-226	Front Sight Screw, (long)	60	99-422	Pistol Grip Cap
27	340-219C	Front Sight	61	24-669	Pistol Grip Cap Liner
28	53-289	Dummy Screw	62	A340-3C	Stock
29	325-2	Receiver	63	515-98	Trigger Guard Screw (rear)
30	325-176	Barrel Lug	64	340-99C	Trigger Guard
31	325-10	Barrel Lug Nut	65	325-516	Recoil Lug Screw
32	325-1	Barrel	66	340-8	Barrel Band Screw
33	325-6	Barrel Band	67	A340-142C	Magazine Assembly 30-30 / 225 Winchester
34	325-7	Barrel Band Nut	67	A340-142H	Magazine Assembly 222 Remington
35	322-56	Ejector Spring	67	A340-142M	Magazine Assembly 223 Remington