Winchester  Model 97


Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server

The drawings listed below are scanned off existing factory catalogs, or existing books 
These Illustrated parts Drawings are shown only to help you identify needed parts, they ARE NOT parts that are made or supplied by the host of this website


Most of these illustrations will be from factory catalogs, however some are taken from Frank de Haas's Single Shot Rifle book & are for identification only, & ARE NOT factory part numbers unless identified as such.  This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.

 

Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed 


 

Part numbers listed above & below are factory part numbers,  as shown in this illustration from factory 1954 parts catalog.

 

 

The parts listed below are for your identification purposes only. 
The author of this website DOES NOT have any parts.

 

 

 297  Action Slide, Take-down (12 & 16ga)   11397  Extractor Plunger RH
 1597  Action Slide Handle (12 & 16ga)   11497  Extractor Plunger Spring RH
 2597  Action Slide Sleeve Screw Cap  11597  Extractor Pin LH (12ga)
 2697  Action Slide Lock  11697  Extractor Pin LH (16ga)
 2797  Action Slide Lock Joint Pin  11797  Ejector Spring (12ga)
 2897  Action Slide Lock Joint Pin Stop Screw  11897  Ejector Spring (16ga)
 2997  Action Slide Lock Spring  11997  Ejector Spring Screw
 3097  Action Slide Lock Spring Screw  12097  Ejector Pin (12ga)
 3197  Action Slide Lock Release Plunger  12197  Ejector Pin (16ga)
 3297  Action Slide Lock Release Plunger Pin  12297  Extension, Take-down
 3397  Action Slide Lock Release Plunger Pin Spring  12397  Extension Stop Screw, Take-down
 3497  Action Slide Spring  12497  Firing Pin (12ga)
 3597  Action Slide Hook  12597  Firing Pin (16ga)
 3697  Action Slide Hook Screw  12697  Firing Pin Stop
 3312  Adjusting Sleeve, Take-down  12797  Firing Pin Lock Screw
 3312-1  Adjusting Sleeve, Take-down (1/8" heavy draw)  12897  Firing Pin Lock Spring
 3312-2  Adjusting Sleeve, Take-down (3/8" heavy draw)  12997  Firing Pin Stop Pin
 3312-3  Adjusting Sleeve, Take-down (1/2" heavy draw)  13097  Guard Bow
 3312-4  Adjusting Sleeve, Take-down (3/4" heavy draw)  13197  Hammer Complete
 3312-5  Adjusting Sleeve, Take-down (1" heavy draw)  13297  Hammer Pin
 3312-9  Adjusting Sleeve, Take-down (1/4" heavy draw)  13397  Hammer Stirrup
 3897  Adjusting Sleeve Lock, Take-down  13497  Hammer Stirrup Pin
 3997  Adjusting Sleeve Lock Screw, Take-down  13597  Mainspring
 4197  Barrel, Plain, Take-down (12ga specify choke & length)  13697  Mainspring Strain Screw
 4297  Barrel, Plain, Take-down (16ga specify choke & length)  13797  Mainspring Pin
 4597  Barrel Chamber Ring, Take-down (12ga)  14097  Magazine tube, Take-down (12ga)
 4697  Barrel Chamber Ring, Take-down (16ga)  14197  Magazine tube, Take-down (16ga)
 4797  Barrel Chamber Ring Retaining Screw (2 required)  14597  Magazine Band, Take-down (12ga)
 5497  Breech Bolt (12ga)  14697  Magazine Band, Take-down (16ga)
 5597  Breech Bolt (16ga)  14897  Magazine Band Bushing Screw, Take-down (12ga) 
 6297  Butt Stock Complete  14997  Magazine Band Bushing Screw, Take-down (16ga) 
 7097  Butt Stock Bolt & Washer  15097  Magazine Band Bushing, Take-down (12ga) 
 7397  Butt Plate  15197  Magazine Band Bushing, Take-down (16ga) 
 7597  Butt Plate, Metal  15497  Magazine Plug, Take-down 
 9112  Butt Plate Screw (2 required)  15597  Magazine Plug Screw, Take-down 
 7797  Cartridge Guide (12ga)  15697  Magazine Plug Stop, Take-down (12ga)
 7897  Cartridge Guide (16ga)  15797  Magazine Plug Stop, Take-down (16ga)
 7997  Cartridge Guide Friction Spring  15897  Magazine Stop, Take-down (12ga)
 8097  Cartridge Guide Rivet  15312  Magazine Lock Pin & Spring, Take-down (12ga)
 8197  Cartridge Guide Stop Screw  15512  Magazine Lock Pin Spring, Take-down (12ga)
 8297  Cartridge Stop & Spring, RH (12ga)  16397  Magazine Spring
 8397  Cartridge Stop & Spring, LH (12ga)  16597  Magazine Follower, Take-down (12ga)
 8497  Cartridge Stop & Spring, RH (16ga)  16697  Magazine Follower, Take-down (16ga)
 8597  Cartridge Stop & Spring, LH (16ga)  17697  Receiver Shank
 9097  Cartridge Stop Spring  16897 1/2  Spanner Wrench, Forearm
 9197  Cartridge Stop Screw, RH  17797  Sear
 9297  Cartridge Stop Screw, LH  17897  Sear Pin
 9597  Carrier, Standard (12ga)  17997  Sear Spring
 9697  Carrier, Standard (16ga)  18097  Sear Spring Screw
 10797  Carrier Pin  18197  Trigger
 10897  Carrier Pin Stop Screw  18297  Trigger Pin
 10997  Extractor, RH (12ga)  18397  Trigger Spring
 11097  Extractor, RH (16ga)  18497  Trigger Spring Screw
 11197  Extractor, LH (12ga)  18712  3 Shell Plug
 11297  Extractor, LH (16ga)  18712  Front Sight, Standard (81-A)

Parts listed below are for the older solid frame firearms

 2497  Action Slide Handle Screw, (Old Style 3 screw FA)  9497  Cartridge Stop Screw LH, (Old Style, on side of action)
 9397  Cartridge Stop Screw RH, (Old Style, on side of action) . .

 

Copyright © 2004 - 2015  LeeRoy Wisner  with credit given for original illustrations.  All Rights Reserved

Back to Ramblings

Originated 11-10-05  Last updated 12-19-2014
 contact the author