Winchester Model 70, Post 64
 Push Feed, Anti Bind Version

Actual load times may take a while as these scanned pictures may be large, & depending on the speed of your computer & server

The drawings listed below are scanned off existing factory catalogs, or existing books 
These Illustrated parts Drawings are shown only to help you identify needed parts, they ARE NOT parts that are made or supplied by the host of this website


Most of these illustrations will be from factory catalogs, however some are taken from Frank de Haas's Single Shot Rifle book & are for identification only, & ARE NOT factory part numbers unless identified as such.  This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.

 

Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed 

 

 

 

This illustration above taken from original factory parts list dated 1978 
This illustration is for the anti-bind bolt tab & is for guns above serial number 1,050,000, for guns below that s/n, different bolt parts are used.

 

The parts listed below are for your identification purposes only. 
The author of this website DOES NOT have any parts.

 

 

 Barrel, (to many versions to list here)  4417  Magazine Cover Complete (Super Grade & African)
 23017  Breech Bolt, Regular, 30-06 size,  Anti-Bind  4417A  Magazine Cover Complete (22-250 & 225 Winc)
 23117  Breech Bolt, Magnum,  Anti-Bind  10417  Magazine Cover Complete Target (steel)
 24917  Breech Bolt, 222 Rem,  Anti-Bind  4517  Magazine Cover Catch
 1317A  Breech Bolt, Target,  Anti-Bind  4617  Magazine Cover Catch Pin
 23217  Breech Bolt Complete, Regular, Anti-Bind  4717  Magazine Cover Catch Spring
 23317  Breech Bolt Complete, Magnum, Anti-Bind  9970  Magazine Cover Hinge plate Screw
 25017  Breech Bolt Complete, 222 Rem, Anti-Bind  21517  Magazine Follower (243 & 308)
 1717  Breech Bolt Sleeve  21617  Magazine Follower (30-06, 7mm mag, 338 mag)
 1753  Breech Bolt Sleeve, (target)  21717  Magazine Follower (375 H&H)
 1817  Breech Bolt Sleeve Complete  21817  Magazine Follower (22-250 & 225 Winc)
 25317  Breech Bolt Sleeve Complete (target)  23517  Magazine Follower (222 Rem)
 1917  Breech Bolt Sleeve Cap  5417A  Magazine Spacer (25-06, 270, 30-06)
 2017  Breech Bolt Sleeve Cap Pin  10817  Magazine Spring (22-250 & 225 Winc)
 2117  Breech Bolt Sleeve Lock  10917  Magazine Spring (243 & 308)
 2117A  Breech Bolt Sleeve Lock Pin  11017  Magazine Spring (25-06, 270, 30-06)
 2217  Breech Bolt Sleeve Spring  11117  Magazine Spring (222 Rem)
 2317  Breech Bolt Stop, (std & magnums)  12217  Magazine Spring  (264, 300, 338 Winc, 7mm Rem Mag)
 2417  Breech Bolt Stop, Long Action (243 & 308)  27117  Pistol Grip Cap, Composition (requires fitting)
 2517  Breech Bolt Stop, (375 H&H magnum)  27217  Pistol Grip Cap Spacer, Composition (requires fitting)
 20917  Breech Bolt Stop, Long Action (22-250 & 225)  Fig. 14  Quick Detachable Swivel (2 required)
 21017  Breech Bolt Stop, Long Action (243 & 308)  302103  Recoil Pad
 2617  Breech Bolt Stop Spring,  Long Action (222 Rem)  7821  Recoil Pad, Solid (African)
 30394NRA  Butt Plate (composition)  205103  Recoil Pad Spacer
 1952D  Butt Plate (rubber)  2618  Recoil Pad Screw (2 required)
 25617  Butt Plate Spacer  5817  Safety (except Target)
 9112  Butt Plate Screw (2 required)  27617  Safety, Target
 2717  Ejector, (except 222 Rem)  5917  Safety Pin
 24517  Ejector, (except 222 Rem above s/n 991,800)  6017  Safety Plunger
 2817  Ejector Pin, (except 222 Rem)  11370  Safety Plunger Spring
 24617  Ejector Pin, (except 222 Rem above s/n 991,800)  6117  Sear
 2917  Ejector Spring  6217  Sear Pin
 3017  Extractor (regular)  11670  Sear Spring
 3117  Extractor (magnum)  6317A  Sight, Front (.260 high)
 1388  Extractor Plunger  6317B  Sight, Front (.290 high)
 3217  Extractor Spring  6317C  Sight, Front (.310 high)
 3317  Firing Pin (except 222 Rem & target)  4017  Sight, Front (.350 high, 458 African only)
 21217  Firing Pin (222 Rem)  6417NS  Sight Cover Front (above s/n 866,000)
 1713  Firing Pin (target)  6417  Sight Cover Front (375 H&H, & Super Grade)
 7270C  Firing Pin Spring  6517NS  Sight Ramp, Front (above s/n 866,000)
 12317  Firing Pin Spring Retainer  22417  Sight Ramp, Front (375 H&H)
 12417  Firing Pin Spring Washer  6517  Sight Ramp, Front (Super Grade)
 1853  Firing Pin Stop Screw (target)  6617  Sight Ramp Screw, Front (short)
 1019  Forearm Cap (mannlicher)  6717  Sight Ramp Screw, Front (long)
 1119  Forearm Cap Screw (mannlicher)  6817  Sight, Rear (standard barrel only)
 26317  Forearm Screw Eye  6817A  Sight, Rear, 375 H&H  (above s/n 866,000)
 26417  Forearm Screw Eye Washer  6817B  Sight, Rear, 458 African  (above s/n 866,000)
 10217A  Forearm Screw Eye Escutcheon  6917  Sight, Rear Screw (2 required)
 7970  Forearm Screw Eye Escutcheon (375 & 458)  27717  Stock Swivel Stud
 26717  Forearm Tip, Composition (requires fitting)  8217  Trigger
 26817  Forearm Tip Spacer (requires fitting)  22517  Trigger Guard
 26917  Forearm Tip Dowel (requires fitting)  28017  Trigger Guard, Steel (458)
 3717  Magazine (225 Winc)  22817  Trigger Guard, Complete
 3717B  Magazine (25-06, 270 Winc, 30-06 Springfield)  8417  Trigger Guard Screw, Front
 3717C  Magazine (264, 300, 338 Winc, 7mm Rem Mag)  8517NS  Trigger Guard Screw, Rear
 3717L  Magazine (22-250)  8717  Trigger Pin
 3717M  Magazine (458 Winc magnum)  8817  Trigger Spring
 3817  Magazine (243, 308 Winc)  8917  Trigger Stop Screw
 4017E  Magazine (375 H&H)  12270C  Trigger Stop Screw Nut (3 required)
 21417  Magazine (222 Rem) . .
 4317  Magazine Cover Complete  . .

The below parts fit the earlier versions between s/n 700,000 & 1,050,000

 1317  Breech Bolt, Stripped, (std calibers, no anti bind, to 1968)  3317  Firing Pin, (fits sleeve with cap up to 1981)
 9717  Breech Bolt, Stripped, (mag calibers, no anti bind, to 1968)  5817  Safety Lever (up to 1994)
. .  11017  Magazine Spring (with hole)
. . . .

 


Copyright © 2004 - 2015  LeeRoy Wisner  with credit given for original illustrations.  All Rights Reserved

Back to Ramblings

Originated 05-17-04  Last updated 12-19-2014
to contact the author click here