Remington Model 12

 

Shown here is the standard model 12 with octagon barrel
 

The illustration shown below was taken from the NRA Firearms Assembly book and their part numbers converted below to reflect factory part numbers.  This is important as about all obsolete parts suppliers use ONLY factory or closely associated numbers where ever possible so everyone is on the same page.

 

 

Note, for some of the older firearms, many over 100 years old, the factories never used what we now know as assembly drawings, but just views of many of the component parts & possibly randomly placed 

 

The parts listed below are for your identification purposes only. 
The author of this website DOES NOT have any parts.

 



The Above illustration taken from NRA Firearms Assembly book, & shows the peep sighted target version,
the standard model would not have the target sights nor sling swivel stud on the magazine ring
Carriers were made in about 6 different configurations depending on vintage and caliber

The BLACK part number listed below is the actual Remington number

 

Ref.

 Part Number

Nomenclature

Ref.

 Part Number

Nomenclature

  1  22  Firing Pin Spring  29  44 Rd  Magazine tube, outer, (Round Barrel)
  2  23  Firing Pin Spring Guide  29  44 Oct  Magazine tube, outer, (Octagon Barrel)
  3  21  Firing Pin Pin  30  27  Forearm Screw, Plain,  series 1909 (Shown)
  4  21  Ejector Pin   30  27-S  Forearm Screw, Scalloped
  5  53  Receiver Bushing, Plain .  112  Forearm Screw Lock Screw (fits 27-S)
  6  66  Takedown Screw  31  24  Forearm
  7  85  Takedown Screw Retainer  32  8  Buttplate
  8  220  Firing Pin, (series 1909)  33  17810W  Buttplate screw
  9  407  Breech Bolt, 22 RF  34  62  Buttstock, Regular Straight Grip Version
 10  19  Extractor Spring  34  63  Buttstock, Gallery Pistol Grip Version
 11  217

 Extractor

 35  64  Stock Bolt
 12  18  Extractor Plunger  36  65  Stock Bolt washer
 13  54  Receiver Bushing, threaded  37  37  Ejector Spring Screw
 14 .  Receiver  38  36  Ejector Spring
 15  42 1/2 Rd  Magazine Assembly, (22 RF round barrel)  39 .  Receiver Tang Sight
 15  42 1/2 Oct  Magazine Assembly, (22 RF octagon barrel)  40 .  Receiver Sight Screw
 16  5  Barrel, Round  41  429  Trigger plate
 17  228  Front Sight, Regular  42  68  Trigger
 17 .  Front Sight, (Gallery, Globe)  43  70  Trigger Spring
 18  57  Retainer, (series 1909, under s/n 650,000)  44  71  Trigger Spring Plunger
.  257  Retainer, (over s/n 650,000)  45  411  Carrier
 19  13  Carrier Dog Pin  46  60  Safety Plunger Pin
 20  15  Cartridge Stop  47  47  Mainspring Rod
 21  514  Carrier Dog Spring  48  46  Mainspring
 22  212  Carrier Dog  49  61  Safety Spring
 23  2  Action Bar Plunger  50  59  Safety Spring Plunger
 24  3  Action Bar Plunger Pin  51  58  Safety button
 25  4  Action Bar Plunger Spring  52  32  Hammer Pin
 26  39  Magazine Screw  53  31  Hammer Bushing
 27  201  Action Bar  54  430  Hammer
 28  138  Magazine ring  55  69  Trigger Pin

 
Note - There are 3 different series of this gun, 1909, 1926 & 1949, plus 4 different variations.  So some parts may not be as they appear in the illustration.

 

 


Copyright 2005 - 2016  LeeRoy Wisner  with credit given for original illustrations.  All Rights Reserved

Back to Ramblings

Originated 02-05-2005 Last updated 01-28-2016
Contact the author